Late Model

INSTALLATION 

Courtesy of CHRYSLER GROUP, LLC

1. If removed, install the bezel onto the Keyless Ignition Node (KIN) (2). Verify the tab (3) on each side are full engaged.

   Courtesy of CHRYSLER GROUP, LLC

2. Install the KIN into the KIN bracket (3). Verify the tabs on the KIN are fully engaged.
3. Install the KIN and bracket (3) to the right instrument panel trim panel (1).
4. Install the fasteners (2) and tighten securely.
5. Install the right instrument panel trim panel. Refer to PANEL, INSTRUMENT PANEL TRIM, CENTER, INSTALLATION .
6. If the KIN is being replaced, perform the RFH verification test. Refer to RADIO FREQUENCY HUB (RF HUB) VERIFICATION TEST .