Pursuit Model

REMOVAL 

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Remove the right instrument panel trim panel. Refer to PANEL, INSTRUMENT PANEL TRIM, CENTER, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the fasteners (2) and release the Keyless Ignition Node (KIN) module bracket (3) from the right trim panel (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Press the tabs that secure the KIN (2) to the KIN bracket (3) and remove the KIN (2).