Module, Power Liftgate (PLGM): Removal
- Disconnect and isolate the battery negative cable.
- Move the quarter trim panel from the lower left inner D-pillar (1) far enough to access the Power LiftGate Module (PLGM) (2). Refer to PANEL, QUARTER TRIM, REMOVAL .
- Disconnect the wiring harness connectors (3) from the PLGM.
- Release the retainers at the PLGM housing and pull the top of the PLGM away from the lower left inner D-pillar.
- Disengage the retainers at the lower end of the PLGM housing from the slots in the lower left inner D-pillar.
- Remove the PLGM from the vehicle.