LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Radio Frequency (RF Hub) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Frequency (RF Hub): Installation

NOTE:

Replace and Program the module(s) per the RF-Hub, BCM, PCM FOBIK and ELV Replacement and Programming Order Guide. Refer to RF-HUB, PCM AND BCM REPLACEMENT AND PROGRAMMING ORDER GUIDE  .

GC0184538Courtesy of CHRYSLER GROUP, LLC
  1. Position the Radio Frequency (RF Hub) Module to the vehicle, install and securely tighten the fasteners (2).
  2. If equipped, connect the remote start antenna wiring harness connector.
  3. Connect the RF-Hub Module wiring harness connectors (1).
  4. Install the left rear cargo interior trim panel. Refer to PANEL, QUARTER TRIM, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
NOTE:

Program the RF-Hub Module. Refer to MODULE, RADIO FREQUENCY (RF HUB), MODULE PROGRAMMING .

scientia non olet · About LEMON Manuals