LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Active Damping Control (ADCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Active Damping Control (ADCM): Removal

  1. Position the left front seat to its full forward position.
  2. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0145747Courtesy of CHRYSLER GROUP, LLC
  3. From behind/under the left front seat, remove the cover panel from the electronic module tub (4) to access the Active Damping Control Module (ADCM) (2).
  4. Release the integral latches that secure the ADCM to the mounting bracket and slide the module upward to remove it from the mounting bracket.
  5. Disconnect the ADCM wire harness connectors.
scientia non olet · About LEMON Manuals