Early Model

REMOVAL 

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Remove the radio. Refer to RADIO, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Reach in through the radio opening and disconnect the electrical connector (1) from the Keyless Ignition Node (KIN) module.
4. Press the tabs (2) the secure t he KIN to the instrument panel and push the KIN out from behind.

   Courtesy of CHRYSLER GROUP, LLC

5. If replacing the KIN, release the tab (1) on each side of the KIN and remove the bezel.