Late Model

REMOVAL 

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Remove the right instrument panel trim panel. Refer to PANEL, INSTRUMENT PANEL TRIM, CENTER, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the fasteners (2) and release the Keyless Ignition Node (KIN) module bracket (3).
4. Press the tabs that secure the KIN to the KIN bracket (3) to release the KIN.

   Courtesy of CHRYSLER GROUP, LLC

5. If replacing the KIN (2), release the tab (3) on each side of the KIN and remove the bezel.