LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Power Sunroof (PSM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Sunroof (PSM): Installation

WARNING:

Do not attempt to move or reposition the sunroof glass panel or drive cables with the sunroof motor and module unit removed. Damage to the vehicle, to the sunroof or personal injuries may result.

WARNING:

The Sunroof Motor And Module Initialization procedure must be completed any time a sunroof motor and module unit is replaced with a new component. Failure to perform this procedure may result in damage to the vehicle, to the sunroof or in serious or fatal injuries.

GC0170663Courtesy of CHRYSLER GROUP, LLC
  1. Position the sunroof motor close enough to connect the wire harness connector (2).
  2. Position the motor on the sunroof frame.
  3. Install and securely tighten the motor to sunroof frame fasteners (1).
  4. Install the front of the headliner. Refer to HEADLINER, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  6. Perform the Sunroof Motor Initialization procedure. Refer to MOTOR, SUNROOF, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals