LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Radio Frequency (RF Hub) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Frequency (RF Hub): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the left rear cargo quarter trim panel and position aside to access the Radio Frequency (RF Hub) Module. Refer to PANEL, QUARTER TRIM, REMOVAL .
    GC0184538Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the RF Hub Module wiring harness connectors (1).
  4. If equipped, disconnect the remote start antenna wiring harness connector.
  5. Remove the fasteners (2) and the RF Hub Module from the vehicle.
scientia non olet · About LEMON Manuals