Diagnostic Test

PROGRAM ALL FOBIKS

NOTE:

All FOBIKs that are to be used in this vehicle must remain on the front seat near the console during programming.

NOTE:

The RF-Hub must have a minimum of one programmed FOBIK for this DTC to be stored.

With the scan tool, select "Misc. Functions", "Program Ignition FOBIKs" and follow the instructions on the screen.
Program all FOBIKs that are to be used with this vehicle in accordance with Service Information.
Try each FOBIK that was programmed.
Do all FOBIKs operate properly?

Yes
- Test complete.
No
- With the scan tool perform the "RFH", "Reset ECU" and repeat this test from the beginning.