Module, Power Sunroof (PSM): Removal
WARNING:
Do not attempt to move or reposition the sunroof glass panel or drive cables with the sunroof motor and module unit removed. Damage to the vehicle, to the sunroof or personal injuries may result.
WARNING:
The Sunroof Motor And Module Initialization procedure must be completed any time a sunroof motor and module unit is replaced with a new component. Failure to perform this procedure may result in damage to the vehicle, to the sunroof or in serious or fatal injuries.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Lower the front of the headliner to gain access to the sunroof motor. Refer to HEADLINER, REMOVAL .
- Remove the fasteners (1) that secure the motor to the sunroof frame.
- Lower the motor far enough to access and disconnect the sunroof wire harness connector (2).
- Remove the sunroof motor from the vehicle.