Theory Of Operation
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The purpose of the following procedure is to demonstrate how to check a circuit for a Short to Ground.
NOTE:
The circuit shown in illustration is an example, and is intended for demonstrational purpose only.
The following are circuit tests covered in this procedure:
- Testing For A Short To Ground Using An Ohmmeter
NOTE:
Perform the following test using a known good multimeter.
Below is a list of possible causes that could be related to a Short to Ground condition.
| Possible Causes |
|---|
| SHORTED CIRCUIT (CHAFED, PIERCED OR PINCHED WIRES) |
| SHORTED IN-LINE CONNECTOR (BENT, PUSHED OUT OR CORRODED TERMINALS) |