Air Bag, Knee Blocker: Installation

To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, steering column, airbags, airbag curtains, knee blocker, seat belt tensioner, impact sensor or instrument panel component diagnosis or service. Disconnect the Intelligent Battery Sensor (IBS)/negative battery cable assembly from the negative battery post, then wait two minutes for the system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper precautions could result in accidental airbag deployment.

To avoid serious or fatal injury, use extreme care to prevent any foreign material from entering the passenger airbag, or from becoming entrapped between the airbag cushion and the deployment door. Failure to observe this warning could result in occupant injuries upon airbag deployment.

To avoid serious or fatal injury, the knee blocker airbag (also known as the Knee AirBag/KAB or Inflatable Knee Blocker/IKB) deployment door must never be painted. Replacement deployment doors are serviced in the original colors. Paint may change the way in which the material of the deployment door responds to an airbag deployment. Failure to observe this warning could result in occupant injuries upon airbag deployment.