Module, Anti-Lock Brake System (Abs): Installation
WARNING: This page is about a different car, the 2022 RAM ProMaster 3500, 2022 RAM ProMaster 2500, and 2022 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ABM |
| 2 - HCU |
| 3 - SOLENOID VALVE STEM |
CAUTION:
Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.
- Align components and install the ABM (1) on the HCU (2).
1 - MOUNTING SCREWS 2 - ABM - Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to the proper specifications. Refer to the appropriate service information .
- Install the ICU. Refer to INTEGRATED CONTROL UNIT (ICU), INSTALLATION .