Module, Radio Frequency (RF Hub): Installation
WARNING: This page is about a different car, the 2022 RAM ProMaster 3500, 2022 RAM ProMaster 2500, and 2022 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Replace and Program the module(s) per the RF-Hub, BCM, PCM FOBik and ELV Replacement and Programming Order Guide. Refer to MODULE REPLACEMENT AND PROGRAMMING ORDER GUIDE .
- Position the RFHM (3) to the vehicle and install the fasteners (1). Tighten the fasteners securely.
- If equipped, connect the remote start antenna connector.
- Connect the wire harness electrical connectors (2).
- Install the headliner. Refer to HEADLINER, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
NOTE:
Program the RFHM. Refer to MODULE, RADIO FREQUENCY (RF HUB), MODULE PROGRAMMING .