LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> ProMaster 1500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Electronic Control Modules (Service Information)) >> Module, Security Gateway (SGW) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Security Gateway (SGW): Removal

WARNING: This page is about a different car, the 2022 RAM ProMaster 3500, 2022 RAM ProMaster 2500, and 2022 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, use a diagnostic scan tool to perform the Flash Programming Procedure (if available). 

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the lower glove box assembly. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL .
    GC0193019Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (1) from the Security Gateway Module (SGW) (3).
  4. Remove the SGW (3) from the lower glove box assembly (4).
scientia non olet · About LEMON Manuals