Module, Anti-Lock Brake System (Abs): Installation

Courtesy of CHRYSLER GROUP, LLC

1 - ABM

2 - HCU

3 - SOLENOID VALVE STEM

CAUTION:

Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.

Align components and install the ABM (1) on the HCU (2).

Courtesy of CHRYSLER GROUP, LLC

1 - MOUNTING SCREWS

2 - ABM
Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to the proper torque specification. Refer to appropriate service information .
Install the ICU. Refer to INTEGRATED CONTROL UNIT (ICU), INSTALLATION .