LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Instrument Panel Cluster (IPC) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Instrument Panel Cluster (IPC): Removal

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    GC0170265Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (2) securing the Instrument Panel Cluster (IPC) (1) to the instrument panel.
  4. Tilt the top of the IPC away from the instrument panel and disconnect the wire harness connector. Remove the IPC from vehicle.
  5. If necessary, remove the IPC lens by releasing the tabs along the perimeter of the IPC.
scientia non olet · About LEMON Manuals