LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Integrated Center Stack (ICSM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Integrated Center Stack (ICSM): Installation

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0170416Courtesy of CHRYSLER GROUP, LLC
  1. Position the Integrated Center Stack (ICS) (1) to the shifter bezel panel and install the four screws (2).
    GC0166301Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wire harness connectors and install the shifter bezel panel (1).
    GC0166265Courtesy of CHRYSLER GROUP, LLC
  3. For automatic shifter, install the shifter knob and install the screw (4). Tighten the screw securely.
  4. Connect the wire harness connector (3).
  5. Position the shifter bezel (2) and engage the retaining clips.
    GC0170523Courtesy of CHRYSLER GROUP, LLC
  6. For manual shifter, install the shift lever (2) and the bolts (3). Tighten the shift lever bolts to the proper specification. Refer to TORQUE SPECIFICATIONS - 5.7L & 6.4L or TORQUE SPECIFICATIONS - 6.2L .
  7. Position the shifter boot (1) and engage the retaining clips.
  8. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals