Module, Keyless Ignition Node (Kin): Installation
WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
- Push the Keyless Ignition Node (KIN) (1) into the instrument panel until it snaps into place.
- Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
- Position the instrument cluster bezel and engage the retaining clips.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.