Sensor, Coolant Temperature: Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install the Engine Coolant Temperature (ECT) sensor (2) and turn it clockwise 1/4 turn to engage the lock tab (3).
2. Connect the ECT sensor wire harness connector (1).
3. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
4. Install the air cleaner resonator. Refer to RESONATOR, AIR CLEANER, INSTALLATION .
5. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
6. Install the right lower shield and securely tighten the fasteners.
7. Remove support and lower the vehicle.
8. Fill the cooling system. Refer to the appropriate service information.
9. Start and warm the engine and check for leaks.