LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2023 >> Charger R/T >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Powertrain Control (Pcm) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Powertrain Control (Pcm): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the hood ajar switch. Refer to SWITCH, HOOD AJAR, INSTALLATION .
    GC0144877Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Powertrain Control Module (PCM) fastener (1).
  4. Disconnect the PCM wire harness connectors (2).
  5. Remove the PCM (3) from the vehicle.
    GC0144878Courtesy of CHRYSLER GROUP, LLC
  6. If required, remove the NVH rubber bumper (3) from the PCM (4).
  7. If required, remove the PCM mounting bracket fasteners (2) and remove the bracket (1).
scientia non olet · About LEMON Manuals