10 Inch Screen
- Remove the fasteners (2) that secure the Display Screen Module (DSM) (1) to the DSM bracket.
- Pulling the DSM (1) gently by hand, release the upper retaining clips (3) and then lift up on the DSM (1) to disengage the lower posts from the DSM bracket.
- Disconnect the wire harness connectors from the DSM (1) and remove from vehicle.
- Using a trim stick or equivalent, release the center air outlets (1) and remove them from the vehicle.
- Remove the fasteners (1) that secure the DSM bracket (2) and remove the bracket from the vehicle.