Module, Transmission Control (TCM): Removal

NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to align the PROXI configuration data into the new ECU. Follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under Body Control Module (BCM) Miscellaneous Functions menu.

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the left front wheel and tire assembly. Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Remove the lower Transmission Control Module (TCM) mounting fasteners (1).
Remove the support and lower the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the TCM wire harness connector (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the upper TCM mounting fasteners (1a).
Remove the TCM (1b) from the vehicle.