LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2024 >> Durango R/T, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Body Control (BCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Body Control (BCM): Installation

  1. Install the Body Control Module (BCM) (1) onto the mounting bracket.
  2. Install and securely tighten the BCM mounting bracket fasteners (2).
    GC0158355Courtesy of CHRYSLER GROUP, LLC
  3. Connect all BCM wire harness connectors.
  4. Install the passenger side lower kick panel.
  5. Install the passenger side lower Instrument Panel (IP) closeout panel.
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. Using the scan tool, perform the Body Verification Test. Refer to BODY VERIFICATION TEST .
scientia non olet · About LEMON Manuals