Diagnostic Test
CHECK FOR AN ACTIVE DTC
- With the scan tool, read the Steering Column Control Module (SCCM) DTCs and record on the repair order.
Is the DTC active?
Yes
- If the Downshift Paddle Shift Switch is free of any debris or foreign material that may cause a stuck switch. If no problem is found, replace the Steering Column Control Module (SCCM) in accordance with the Service Information. Refer to: MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL and MODULE, STEERING COLUMN CONTROL (SCCM), INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to: BODY VERIFICATION TEST .
No
- Test complete. The condition or conditions that originally set this DTC are not present at this time.
- Perform the TESTING FOR AN INTERMITTENT CONDITION. Refer to: TESTING FOR AN INTERMITTENT CONDITION .