LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2024 >> Durango SXT, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Body Control (BCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Body Control (BCM): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the passenger side lower Instrument Panel (IP) closeout panel.
  3. Remove the passenger side lower kick panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL .
  4. Disconnect all of the Body Control Module (BCM) connectors.
    GC0158355Courtesy of CHRYSLER GROUP, LLC
  5. Remove the lower BCM mounting bracket fasteners (2).
  6. Slide the BCM (1) downward until the BCM is released from the two interference tabs, located at the top of the BCM.
  7. Remove the BCM from the vehicle.
scientia non olet · About LEMON Manuals