Trailer Tow Module (TTM)

REMOVAL 

1. Remove D-pillar trim fasteners and remove the D-pillar trim.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

2. Release the TTM bracket tab and disengage the TTM bracket from the D-pillar.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Tab

   2 - Fasteners

   3 - Wire Harness Connectors

3. Disconnect the TTM wire harness connectors.
4. Remove the TTM fasteners and disengage the TTM from the TTM bracket.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Tighten all the fasteners securely.