Diagnostic Test

FORWARD FACING CAMERA VERIFICATION TEST 

1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
2. With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
3. Make sure that all accessories are turned off and that the battery is fully charged.
4. If the FFCM was replaced or moved in any way, with the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to FFCM-HALF MODULE CALIBRATION .
5. With the scan tool, read FFCM DTCs.

   Are there any DTCs present in the FFCM?

   Yes 

   • Repair the FFCM DTC(s). Refer to FORWARD FACING CAMERA MODULE (FFCM), DIAGNOSTIC CODE INDEX .

   No 

   • Repair is complete.