10 Inch Screen

REMOVAL 

1. Remove the fasteners that secure the Display Screen Module (DSM) to the DSM bracket.
2. Pulling the DSM gently by hand, release the upper retaining clips and then lift up on the DSM to disengage the lower posts from the DSM bracket.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Display Screen Module (DSM)

   2 - Fasteners

   3 - Upper Retaining Clips

3. Disconnect the wire harness connectors from the DSM and remove from vehicle.
4. Using a trim stick or equivalent, release the center air outlets and remove them from the vehicle.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Center Air Outlets

5. Remove the fasteners that secure the DSM bracket and remove the bracket from the vehicle.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - DSM Bracket

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Tighten all the fasteners securely.