Set Condition
- C053D - The PCM determines that the Master Cylinder Pressure Sensor signal is irrational.
- C10F5 - The PCM determines that the Brake Torque signal is irrational.
- P057B - The PCM determines that the Brake Pedal Position Sensor signal is irrational.
- U0121 - The PCM does not receive the Brake Pedal Position Sensor signal.
- U0129 - The PCM does not receive the Master Cylinder Pressure Sensor signal.
- U0418 - The PCM receives an SNA message indicating that the has detected a fault in the Master Cylinder Pressure Sensor signal.
- U11BF - The PCM receives an SNA message indicating that the has detected a fault in the Brake Pedal Position Sensor signal.
- (C0501, C0507, C050D, C0513) Wheel Speed Signal Rationality Faults - When at a stop, one WSS signal is showing vehicles speed output and the other three WSS signals are reading 0 OR When the difference between one WSS signal compared to the other three WSS signals is more than 11 MPH, for 30 seconds.
- (U1409, U140A, U140B, U140C, U1417) Implausible Wheel Speed and Distance Signal Faults - These faults will typically set when the ABS Module detects a fault with one of the WSS signals. The ABS Module will send an SNA or error flag against the sensor.