ESM Verification Test

PERFORM THE ESM VERIFICATION TEST 

1. Reinstall any removed components.
2. Reconnect any disconnected electrical connectors.
3. With the scan tool, erase DTCs.
4. With the brakes applied, slowly change the Shifter position to each of the available positions.
5. The Shift indicators should indicate the correct position for each of the available positions.
6. With the scan tool, read ESM DTCs and record on the repair order.

   Did any ESM DTCs set?

   Yes 

   • Repair ESM DTCs. Refer to DIAGNOSTIC CODE INDEX  .

   No 

   • Test complete.