Diagnostic Code Index
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| P0562-16 | SYSTEM VOLTAGE LOW |
| P0563-17 | SYSTEM VOLTAGE HIGH |
| P0606-42 | INTERNAL CONTROL PROCESSOR |
| P0607-48 | ECU INTERNAL PERFORMANCE |
| P0814-49 | TRANSMISSION RANGE DISPLAY CIRCUIT |
| P081C-11 | PARK INPUT CIRCUIT (CIRCUIT SHORT TO GROUND) |
| P081C-12 | PARK INPUT CIRCUIT (CIRCUIT SHORT TO BATTERY) |
| P081C-64 | PARK INPUT CIRCUIT (SIGNAL PLAUSIBILITY FAILURE) |
| P0914-81 | GEAR SHIFT POSITION CIRCUIT (LIGHT FAULT/SENSORS SKIPPED OR MISMATCH) |
| P0919-64 | GEAR SHIFT POSITION CONTROL ERROR (HEAVY FAULT/SENSORS INCONSISTENCY) |
| P0919-81 | GEAR SHIFT POSITION CONTROL ERROR (HEAVY FAULT/SENSORS SKIPPED) |
| P0928-01 | GEAR SHIFT LOCK SOLENOID CONTROL CIRCUIT/OPEN |
| P0929-1C | GEAR SHIFT LOCK SOLENOID/ACTUATOR CONTROL CIRCUIT 1 PERFORMANCE |
| P0955-01 | AUTOSTICK/ERS SWITCH |
| P1C73-24 | PARK SWITCH CIRCUIT STUCK |
| P1C7A-64 | DRIVE BUTTON |
| P1C7A-64 | DRIVE BUTTON STUCK ON |
| P1C82-02 | AUTOSTICK CIRCUIT PERFORMANCE |
| P1CA7-01 | IGNITION SOLENOID CONTROL CIRCUIT HIGH OR OPEN |
| P1D17-1C | IGNITION SOLENOID CONTROL CIRCUIT-RANGE PERFORMANCE |
| U0001-87 | CAN C Bus (Node Mute) |
| U0001-88 | CAN C (Bus Off) |
| U0074-00 | DEDICATED POWERTRAIN-D-PT-CAN BUS OFF |
| U0100-87 | LOST COMMUNICATION WITH ECM/PCM |
| U0101-87 | LOST COMMUNICATION WITH TCM |
| U0129-87 | LOST COMMUNICATION WITH BRAKE SYSTEM CONTROL MODULE 1 |
| U0140-87 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0155-87 | LOST COMMUNICATION WITH CLUSTER/CCN |
| U0401-86 | IMPLAUSIBLE DATA RECEIVED FROM ECM/PCM |
| U0402-86 | IMPLAUSIBLE DATA RECEIVED FROM TCM |
| U0415-86 | INVALID DATA RECEIVED FROM ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE "A" |
| U0422-86 | IMPLAUSIBLE DATA RECEIVED FROM BODY CONTROL MODULE |
| U0423-86 | IMPLAUSIBLE DATA RECEIVED FROM CLUSTER/CCN |
| U1408-86 | IMPLAUSIBLE BRAKE SIGNAL RECEIVED |
| U1704-87 | BODY4 (FROM BODY CONTROL MODULE) MISSING MESSAGE |
| U1930-86 | AGSM_OPERATIONALMODESTS (SNA) PLAUSIBILITY |
| U1933-87 | BCM_COMMAND (FROM BODY CONTROL MODULE) MISSING MESSAGE |