Module, Forward Facing Camera (FFCM): Installation
NOTE:
Make sure the windshield is clean of dirt, dust, or finger prints prior to installing the Forward Facing Camera Module (FFCM).
- Position the FFCM and FFCM bracket to pins on windshield.
- Press the rear of the FFCM forward until it is secured and snapped into the proper position.
- Connect the wire harness connector (1) to the back of the FFCM.
- Install the rear view mirror covers. Refer to MIRROR, REARVIEW, INSTALLATION .
- Perform the FFCM calibration procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .