LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Security Gateway (SGW) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Security Gateway (SGW): Installation

NOTE: If a installing a NEW Security Gateway (SGW) Module, use the scan tool to configure/program the Module. Failure to configure/program the Module will leave the SGW Module in a locked mode, preventing proper SGW Module operation.
  1. Position the SGW Module to the bracket, then install and securely tighten the screws (1).
    GC0180930Courtesy of CHRYSLER GROUP, LLC
  2. Connect the SGW Module wiring harness connectors (1).
    GC0180911Courtesy of CHRYSLER GROUP, LLC
  3. Install and securely tighten the SGW Module bracket bolts (2).
  4. Connect the wiring harness connector, position passenger silencer panel (1) on instrument panel and install the fasteners.
    GC0208954Courtesy of CHRYSLER GROUP, LLC
  5. Install passenger side cowl panel. Refer to PANEL, COWL TRIM, SIDE, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. If a NEW  SGW Module is installed, use the scan tool to configure/program the SGW Module.
scientia non olet · About LEMON Manuals