Module, Global Telematics Box: Installation: Module
- Position the Global Telematics Box Module (TBM2) (2) to the back of the glove box housing (3).
- Install the screws (1) for the TBM2 and tighten the screws securely.
- Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Connect the diagnostic scan tool to the vehicle.
- Navigate to the TBM2
- Select the Misc. Functions tab.
- Select to perform the TBM Replacement Routine .