Fuel System

CAUTION: The fuel system on the Premier model uses a plastic fuel tank and fuel tubes. When using torch, make sure the flame does not contact fuel tank, fuel tubes or clamps. Fuel pressure is tested at the test port on the side of the fuel pressure regulator, next to the fuel return line. Remove test port plug from throttle body to test. See Fig 1 .

Fig 1: Testing Fuel Pressure

Courtesy of CHRYSLER MOTORS.

FUEL INJECTION

Application	Model
2.5L	Throttle Body Injection

FUEL PUMP PERFORMANCE

Application	Pressure
2.5L	14-15 psi (.99-1.07 kg/cm² )