LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1989 >> Summit DL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Basic Testing >> Ignition Checks >> DISTRIBUTORLESS Ignition (1.6L Turbo) >> Power Transistor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Transistor

  1. Remove connector from power transistor. Using a DVOM, place positive lead to terminal No. 4 and negative lead to terminal No. 6. See Figure . Ensure there is no continuity.
  2. Using one 1.5-volt dry cell battery, connect positive end of 1.5-volt battery to transistor terminal No. 5 and negative end of 1.5-volt battery to transistor terminal No. 4. Place positive lead of DVOM to terminal No. 4 and negative lead to terminal No. 6 to ensure continuity is present.
  3. Connect positive end of 1.5-volt battery to transistor terminal No. 2 and negative end of 1.5-volt battery to transistor terminal No. 4. Place positive lead of DVOM to terminal No. 4 and negative lead to terminal No. 1 to ensure continuity is present. If DVOM does not respond properly, replace power transistor.
Fig 1: Ignition Coil Terminal Identification (1.5L SOHC)
G120230Courtesy of CHRYSLER MOTORS.
Fig 2: Ignition Coil Terminal Identification (1.6L DOHC)
G120231Courtesy of CHRYSLER MOTORS.
DIS IGNITION COIL RESISTANCE- Ohms @ 68°F (20°C)

Application Primary Secondary
1.6L Turbo .77-.95 10.3-13.9
scientia non olet · About LEMON Manuals