October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Transistor (2.0L) Test
- Using an ohmmeter, connect ohmmeter leads between power transistor terminals No. 1 and 3. Using a 1.5-volt dry cell battery, connect positive battery lead to power transistor terminal No. 2 and negative lead to terminal No. 3. Perform TEST 1. See Fig 1
.
- When dry cell battery is connected, ohmmeter should read continuity and when disconnected no continuity.
- Connect ohmmeter between power transistor terminals No. 6 and 3. Using a 1.5-volt dry cell battery, connect positive battery lead to power transistor terminal No. 5 and negative lead to terminal No. 3. Perform TEST 2. See Fig 1
. When dry cell battery is connected, ohmmeter should read continuity and no continuity when disconnected.
- Replace power transistor if it does not test as described.
Courtesy of CHRYSLER MOTORS.