LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1993 >> Vision ESi >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES-Mark IV >> Diagnosis & Testing >> DRB-II Test Functions >> Entering DRB-II Main Menu
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Entering DRB-II Main Menu

  1. Ensure ignition is off. Attach DRB-II to Chrysler Collision Detection (CCD) data link connector. Data link connector is located on lower section of dash panel, right of steering column. SeeFigure . Turn ignition switch to RUN position.
  2. All DRB-II character positions will glow and copyright information will appear on screen for a few seconds. If DRB-II displays NO RESPONSE message, go to TEST 34A CORRECTING DRB-II NO RESPONSE CONDITION  under SELF-DIAGNOSTIC TESTS. If DRB-II screen is blank or any error messages appear, see DRB-II PROBLEMS & ERROR MESSAGES  .
scientia non olet · About LEMON Manuals