Verification Test 6A
WARNING: This page is about a different car, the 1992 Dodge Dynasty, 1992 Chrysler New Yorker Fifth Avenue, 1992 Chrysler New Yorker, and 1992 Chrysler Imperial. However, it is still accessible from the selected car via links, so may be relevant.
- Reconnect all components and connectors that have been disconnected. Connect DRB-II, if not already connected. Turn ignition switch to ON position with engine off. If DRB-II display is blank, perform TEST 1A .
- If DRB-II displays a bus failure message on DRB-II, perform bus failure message test displayed. See TEST 23A .
- If DRB-II displays NO RESPONSE for any vehicle equipped module, perform NO RESPONSE test. Perform TEST 36A .
- If DRB-II does not display NO RESPONSE for any vehicle equipped module, check vehicle to see if original customer's complaint is present. If original customer complaint is present, retest system. If customers original complaint is not present, repair is complete.