ABS Mode
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- To perform ABS self-diagnostic tests, DRB must be in ABS mode. Access DRB main menu. See ENTERING DRB MAIN MENU.
- At DRB main menu, press "4" (SELECT SYSTEM) key to enter diagnostic test program. Press DOWN ARROW 3 times to change menu display.
- Press "5" (ABS) key to enter ABS mode of DRB program. ABS menu will appear after a few seconds. Select ABS type. Screen will display a partial menu of DRB test categories for ABS. Press DOWN ARROW 3 times to view rest of menu.
- Following test functions can be accessed from ABS menu: SYSTEM TESTS, READ FAULTS, STATE DISPLAY, ACTUATOR TESTS and ADJUSTMENTS.
- SYSTEM TESTS Not available in ABS diagnostic program.
- READ FAULTS Allows user to read fault messages.
- STATE DISPLAY Allows user to read states or values of a variety of sensors, inputs/outputs and components.
- ACTUATOR TESTS Allows user to activate various outputs, valves and hydraulics to verify proper operation.
- ADJUSTMENTS Allows user to erase fault messages.