Starter Relay Test

1. Verify battery is fully charged and in good condition.
2. Perform starter solenoid test.
3. Locate and remove starter relay as follows:
a. On except Acclaim, LeBaron Landau, Sundance, Shadow and Spirit, the starter relay is located in the [1][2]power distribution center mounted near the LH strut tower.
b. On Acclaim, LeBaron Landau, Sundance, Shadow and Spirit, the starter relay is located on the front of the LH strut tower.
4. Perform starter relay test shown.
Ignition Switch Test
After testing starter solenoid and relay, test ignition switch and wiring. Check all wiring for opens or shorts and all connectors for being loose or corroded.