Rear Alignment

Fig. 2 Adjusting Rear Wheel Camber. 4 Wheel Drive:

CAMBER

NOTE: Always adjust toe-in following a camber adjustment, toe in will vary 0.035 inch for every camber scale adjustment.
1. Measure camber using a camber/caster/kingpin gauge.
2. If camber is not within specifications, adjust by moving the mounting bolt located on the crossmember side of the arm.

Fig. 3 Adjusting Rear Wheel Toe-in. 4 Wheel Drive:

TOE-IN

1. Measure toe-in using a toe-in gauge.
2. If toe-in is not within specifications, adjust by moving the mounting bolts located on the crossmember side of the trailing arm.