Engine Controls - Adjustments: 2.0L
- Loosen throttle cable. Disconnect Idle Position Switch (IPS) connector. See Fig 1
. Loosen lock nut on IPS.
- Turn IPS counterclockwise until throttle valve fully closes. Connect a Digital Volt-Ohmmeter (DVOM) between IPS terminal and ground. Turn IPS clockwise until DVOM indicates continuity.
- Turn IPS another 15/16 of a turn from point where DVOM indicated continuity. Hold IPS while tightening lock nut. Adjust throttle cable, basic idle speed and throttle position sensor.
Courtesy of CHRYSLER CORP.