LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1994 >> Talon ES, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Tests W/Codes - Body Control Computer (Convert)) >> Vehicle Communications Tests >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect all components that were previously disconnected. Ensure ignition is off and DRB is connected. Turn ignition on. If DRB screen is blank, go to TEST 2A. If DRB screen is not blank, go to next step.
  2. If there is a bus failure message on DRB, go to TEST 1A. If there is no bus failure message on DRB, select module in question. If DRB shows NO RESPONSE, go to TEST 1A.
  3. If DRB does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals