Cruise Control Switches
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Access both cruise control switches. Disconnect both cruise control switch 2-pin connectors. Using an ohmmeter, check both cruise control switches. If either cruise control switch does not test as specified, replace the defective cruise control switch. Refer to CRUISE CONTROL SWITCH SPECIFICATIONS . Also, refer to CONNECTOR IDENTIFICATION .
CRUISE CONTROL SWITCH SPECIFICATIONS
| Switch Position | Check Between Terminals | Ohms | |||||
|---|---|---|---|---|---|---|---|
| ON/CRUISE/OFF Switch | |||||||
| (1) | 1 & 2 | 22,351-22,848 | |||||
| OFF | 1 & 2 | 0-5 | |||||
| ON | 1 & 2 | 644-668 | |||||
| RES/ACCEL/SET/COAST Switch | |||||||
| (1) | 1 & 2 | (2) | |||||
| RES/ACCEL | 1 & 2 | 5558-5682 | |||||
| SET/COAST | 1 & 2 | 1978-2022 | |||||
|
|||||||