UNABLE TO PROG RCVR, LOCKS CYCLE/NOT CYCLE W/PROG LINE GROUND.

UNABLE TO PROGRAM RECEIVER MODULE WITH A NEW TRANSMITTER, DOOR LOCKS WILL NOT CYCLE. WHEN THE PROGRAM LINE IS GROUND.

(1) Using a voltmeter, check Pin 8 of the RKE module black connector for a battery voltage.

(2) If no voltage check fuse 14 of the junction block, repair as necessary. If OK, go to step 3.

(3) Check Pin 2 of the blue connector ignition voltage.

(4) If no voltage check fuse 13 of the junction block, repair as necessary. If OK, go to step 5.

(5) Using an ohmmeter, check Pin 4 of the RKE module black connector for ground.

(6) If no ground repair as necessary. The ground is located near the airbag control module bracket. If OK, go to step 7.

(7) Check Pin 5 of the RKE module black connector for ground. Check Pin 4 of the black traction control connector for ground. If OK, replace the receiver module. If not OK, repair as necessary.