LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Circuit Tests >> DTC 51 - Valve Relay Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC 51 - Valve Relay Circuit

NOTE: If after all testing procedures have been completed system is not functioning properly, substitute ECU with known-good unit and retest.
  1. Remove and test valve relay. See HYDRAULIC UNIT RELAYS  under COMPONENT TESTING. Replace relay if faulty. If relay is okay, reinstall valve relay and go to next step.
  2. Disconnect ECU 26-pin connector. Using a DVOM, check resistance between ECU connector terminal No. 8 and ground. See Figure. If resistance is infinite, replace ECU. If resistance is not infinite, repair short between ECU connector and valve relay. See WIRING DIAGRAM .
scientia non olet · About LEMON Manuals