LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Talon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - Turbo >> Engine Sensors & Switches >> Sensors >> Throttle Position Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position Sensor

  1. Disconnect connector from throttle position sensor, located on side of throttle body. Using ohmmeter, check resistance between terminals No. 1 and 4 on connector for throttle position sensor. See Fig 1 . Resistance should be 3500-6500 ohms.
  2. Using ohmmeter, check resistance between terminals No. 2 and 4 while moving throttle from idle position to full throttle. Resistance should change smoothly in proportion to throttle opening. If resistance is not within specification or resistance does not change smoothly, replace throttle position sensor.
Fig 1: Identifying Throttle Position Sensor Connector Terminals
G95D13667Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals